Hobby Gauge
Established 1992 No Credit Cards
After 8/31/10
|
|
|
HOME PAGE 321.674.0232 _____________________ HGE Products Detectors, Signal controls, train controls and flasher units DCC Products Lenz DCC; ESU LokSound Track Side Items Tomar Brass Signals and stationary sound devices Control Panels Custom designed control panels and Signal systems Misc. Products Wiring devices, switches and assorted items Services Decoder installations and assorted services 2010 Shows -Train Shows
|
HGE Product Page 2 Train Control and Flashers -- Page 1 Detection and Signal controls
|
|
Send mail to
Corporate@hobbygauge.com with
questions or comments about this web site.
|
HGE-41 Alternater -
A stand alone designed to provide a reversing control
of track power for use with Trolleys or Engines for a back and forth
operation with adjustable timings in both directions. The HGE-41
Alternater operates on 12 to 16 volts DC or AC for the control of the board and
provides attachments for the track and throttle for the track being controlled.
Connections can be soldered directly to the HGE-41 or by using a card edge
connector option. The HGE-41 Alternater can be used for other track side
devices and has adjustable timing control for each direction. The HGE-41
is covered by the exclusive Hobby Gauge Warrantee. Complete wiring
instructions are included and additional options are available at
HGE-48 Master Flasher
- The HGE-48 Master Flasher is a fixed timing unit designed to
control Track side grade crossings, flashing beacons, or signs where a fixed
rate of flash is desired. The HGE-48 Master Flasher operates on 12 to 24
volts DC or AC and provides connection points for the DPDT relay mounted on the
board. The relay allows for wiring connection of power and devices being
controlled. Connections can be soldered directly to the HGE-48 or by using
a card edge connector option. The HGE-48 is covered by the exclusive Hobby
Gauge Warrantee. Complete wiring instructions are included and additional
options are available at
HGE-6 FRED Flasher
- The HGE-6 FRED Flasher is a small flashing unit for use a Rear
end flashing device of beacon flasher in scales from 'N' and larger. The
HGE-6 FRED Flasher operates on 3 to 16 volts DC and has an option of power from
AC of DCC. The HGE-6 FRED Flasher is a fixed rate of flash and can flash an LED
of 1.5v light bulb. Many uses include are a FRED, tower Beacon, Sign or
trackside flashing device. The HGE-6 is covered by the exclusive Hobby
Gauge Warrantee. Complete wiring instructions are included and additional
options are available at