|
HOME PAGE
321.674.0232
_____________________
Train Show
Special
What's New
HGE Products
Detectors, Signal controls,
train
controls and flasher units
DCC Products
Lenz
DCC;
ESU
LokSound
Track Side Items
Tomar
Brass Signals and stationary sound devices
Control Panels
Custom designed control panels and Signal systems
Misc. Products
Wiring devices, switches and assorted items
Services
Decoder
installations and assorted services
Ordering
- Prices
2010 Shows -Train
Shows
| |
HGE Product Page 1
Detection and Signal controls
--
Page 2
Train Control and Flashers
HGE-12 Block Detector
MSRP $ 29.95 Through the rails train detection is a stand alone or can be
incorporated in an existing system, an ideal replacement detector. Capable
for DC - AC - DCC or replacing other block
detectors of other systems. The HGE-12 operates on a 12 to 14 volt AC or
DC supply incorporating an isolation method keeping track the board power from
intruding on to the rails. The HGE-12 has a 2 Amp DPDT relay mounted on
the board to provide switching of devices or signals of your choice. The
DPDT relay provides a switching method you are able to connect the power and
devices of your choice without effecting the operation of the Board.
Installation can be by direct soldering connections to the board or by the use
of a Card Edge Connector. Instructions are included with each HGE-12 and
come fully assembled. Some have asked why the 'Old' style with a
bulky relay and the answer is simple everyone can understand a switch the relay
is a simple switch. The option of what you wire to the switch is your
choice, the electronics of the board works the switch. No special voltage
regulated power supply is needed for the HGE products and every effort is done
to keep the installation simple. The HGE-12 is covered by the exclusive Hobby Gauge
Warrantee. For additional information and installation drawing
GOTO DWG12
Sale Price $ 26.95
 HGE-23 Signal Maintainer
$ 21.95 The HGE-23 Signal Maintainer is a LED Signal
control Device. Providing a Logic circuit which will control 2 independent
LED Signals. The HGE-23 Signal Maintainer will regulate the voltage
going to the LED signal without additional Resistors being installed. The
HGE-23 Signal Maintainer eliminated the need of routing through contacts of
switch machines and relays which are required by normal wiring methods.
The HGE-23 Signal Maintainer requires a any voltage input of 9 to 16 volts AC of DC
and will regulate the voltage going to the LED Signal. Easy to install and
instructions are included for all LED signal configurations. Each HGE-23
Signal Maintainer will provide an output for R Y G aspects for either 3 LED or
Search light signals. The HGE-23 is covered by the exclusive Hobby Gauge
Warrantee. For installation drawings
GOTO DWG23
Sale Price $ 19.76
 HGE-423 Signal
Maintainer Cabinet The HGE-423 Signal Maintainer
Cabinet is the same signal control method as the HGE-23 with additional
features. The HGE-423 Signal Maintainer Cabinet provides for 8 independent
signal controls with up to 12 screw terminal connection for each signal.
The HGE-423 Signal Maintainer Cabinet regulates the power going to each signal
and is ideal for system installation. Wiring instructions and examples are
included with each unit. The HGE-423 is covered by the exclusive Hobby Gauge
Warrantee. For more installation drawings
GOTO DWG423
|
Hobby Gauge
Established 1992 No Credit Cards
After 8/31/10